Princess Pearl Necklace—Right Angle Weave

This is a gorgeous necklace design. It uses a modified right angle weave (RAW) stitch. The design was featured in an old copy of Bead & Button (my favorite magazine for all things beadweaving). The pattern is available for purchase here or if you can find an old copy of the magazine (like your local library?) you could get it free.  It’s in the pattern, Scalloped lace: modified right-angle weave necklace in the December 2008 issue.

Full Disclosure: Most of the beads you see below are from Artbeads.com.  Some of the items I had on hand but all the pretty stuff is from them. To be clear; they gave me the beads so I would create and then write. Nothing really very sinister but I need to tell you this all upfront so none of us gets into trouble.

Supplies:

250 3mm Swarovski Pearls
11/0 Rounded Seed Beads
Fireline & fine needle
Clasp of your choice

The directions use 4mm bicone crystals. That can hit the wallet tough as there are more than 200 crystals in this project. I decided to try small pearls instead. I used Swarovski 5810 3mm Round Pearls in Powder Green. The photos I have taken of the necklace do not do it justice—the color is gorgeous. Because they’re Swarovski, they are all perfectly uniform in color/size/shape. Perfect for a detailed project like this one.

The instructions could use some additional instructions though. I’ve made this necklace a few times with crystals and am a very experienced weaver—it’s confusing. It’s not completely clear how many sections you should make, and the final steps, which is how you get the scalloped effect,  are not clear either. No worries; I’ll help you.

Additional Instructions:

Each section is a series of 5 squares with picots all around.

It’s not totally clear in the directions how many of these sections you should make. This matters because you need to know how many stones you should have to finish the piece. I used some basic math and calculated the intended length of the design and found the necklace too short. I ordered 250 pearls and had plenty to make the necklace exactly the length I needed (and didn’t break the bank).

After you’ve made all the sections you will run through the top of the necklace to create the scallop effect.  This part is not that clear. In the directions they demonstrate the first section which is fine. But the next section is going in a different direction and does not work the same way.

When you get to the next arch, you have to twist the necklace to make it flip in the same direction.

The Final Product:

The clasp on this necklace can be anything really. I chose to use a two-strand to one strand finding and then a clasp. I’ve also done a two strand clasp.  I like to use quality findings whenever possible. If you’re going to do all this work, why cheap out on lousy findings?

The pearl version of this necklace is really great. If you have the opportunity, try it with bicone crystals as well. Put it on and it doesn’t matter what kind of day you had or that all you’re doing is emptying the dishwasher—you will feel like a princess.

 

Technorati Tags: right angle weave,beadweaving,pearls,handmade jewelry,jewelry designs

Crossweave Style Beaded Necklace With Sterling Silver Starfish Charm

This necklace makes me think of the Long Island Sound and beach. On the north shore of Long Island we have very rocky shores. The texture of this necklace and varied hues of blue makes me think of summertime on the sound. Adding the sterling silver starfish charm was an extra bonus.

This necklace is basically made with a crossweave technique. Depending on the stringing you use would determine if you need a needle or not. I used fireline and two needles.

Using smaller fire polished beads on one side and larger on the outside ensures that the necklace drapes nicely around the neck. Supplies below will make a chain about 18 inches long.

 Full Disclosure: Most of the beads you see below are from Artbeads.com.  Some of the items I had on hand but all the pretty stuff is from them. To be clear; they gave me the beads so I would create and then write. Nothing really very sinister but I need to tell you this all upfront so none of us gets into trouble.

Supplies:

• 50 pack of 4mm Fire Polished Beads (I used multicolored blue)
• 50 pack of 6mm Fire Polished Beads (same)
• 11/0 Seed Beads (I used clear delicas)
• Sterling Silver Starfish (Say that 10 times fast)
• Fireline & two needles
• Clasp of your choice

Directions:

1. Take a comfortable amount of thread (1 yard or so) and fold in half. Put a needle on each end.
2. Put 8 seed beads on the right strand.
   
   
   
3. Take the left needle and feed it back through the last bead to make a circle.
4. Feed three seed beads on the right follow with one 6mm fire polished bead and then three more seed beads.
5. Feed two seed beads on the left, follow with one 4mm fire polished bead, and two more seed beads.
   
   
   
6. Put one more seed bead on the right strand and cross your left needle through that bead.
7. Continue steps 4 through 6 until the chain is the length you require.
   
    
   
8. Find the center of your beaded chain and attach your charm.
   
   
   
9. Add a clasp to the end.
   
   
   

Mother of Pearl Necklace

Here’s a really simple summer necklace. All you need is some ribbon, ribbon findings, clasp, bail, mother of pearl pendant, and charm of your choice,

I selected this Mother of Pearl white pendant from Artbeads.com.  I liked the pendant but it wasn’t enough for me, so I added a starfish charm and then attached the bail to both. The pendant is so thin that it works out great and I love the way the charm looks on the mother of pearl.

After putting the pendant together, I made the “chain” using a soft color pink. I made the ribbon about 16 inches long and attached a ribbon finding to each end. Attach a clasp and voila—you have a great summer necklace in under 30 minutes.

Thanks so much to my friends at Artbeads.com  for the great products!

Full Disclosure: Many of the beads you see below are from Artbeads.com.  Some of the items I had on hand but all the pretty stuff is from them. To be clear; they gave me the beads so I would create and then write. Nothing really very sinister but I need to tell you this all upfront so none of us gets into trouble.

Summer Charm Bracelet

I live on Long Island, surrounded by beaches and water. I love the beach, sun, and water but what I really look forward to most each summer is my garden.  Thankfully, my daughter shares my love of gardening and flowers too.

I was in the city recently for the Whole Bead Show and bought some lovely large crystal rondells. They are green with little rosettes inside them. Just gorgeous. As usual, I had no idea what I’d do with them.

Enter the great charms from Artbeads.com.  These are sterling silver charms which make me think of summer. I wanted a little more color on my charm bracelet versus just using a chain.

I strung crystals on eye pins and made little sections with it. I alternated between green Swarovski bicone crystals in 4mm and 6mm size and then the large rondells too. The eye pins allow me to hook the charms to the openings.

This charm bracelet demonstrates everything I like about summer; beatufiul greens, flowers, and gardening. And of course the sparkle of the crystals really makes me happy.

Thanks to Artbeads.com for the great silver charms.

Full Disclosure: Many of the beads you see below are from Artbeads.com.  Some of the items I had on hand but all the pretty stuff is from them. To be clear; they gave me the beads so I would create and then write. Nothing really very sinister but I need to tell you this all upfront so none of us gets into trouble.

Wire Wrapped Pearls and Crystals

I got these really cute Swarovski 4mm Silver-Plated Channel Links in Light Rose and honestly had no idea what to do with them—but that happens a lot to me. I buy beads or findings because I like them and eventually an idea comes to me. I happened to have some Swarovski Crystallized pearls in soft pink and decided to put the two things together.

I decided to wire wrap the pearls and use the wire as a way to join them with the crystals.  I made a bracelet with matching earrings. The result is delicate but elegant. I sell a lot of my jewelry—but this went right in my own jewelry box.

I’ll provide directions below and all the way down are pictures of the finished product.

How to Wrap a Pearl

Supplies needed: 2 inch long eye pins, 4mm crystallized pearls, channel links, clasp.

1. Put the pearl on the eye pin.

2. Bend the wire at a 90 degree angle giving yourself a bit of room between the pearl and the bend. It’s a matter of preference. I like about 1/4 inch.

3. Bend the wire towards you using looping pliers making a circle.

4.  Take one of the channel links and put it on the loop.

5.  Once you bend the wire into a circle, wrap it once around the wire so you close the loop. Make sure it’s tight against the wire before you start to wrap the pearl.

5. Continue wrapping the wire around the pearl. This is not difficult but it does take practice to get the look that you want. The idea is to wrap the wire around the pearl until it meets the bottom loop.

Use your fingers as much as possible, but don’t be afraid to use your pliers for extra oomph. ;)  If you have a bit left over that you cannot wrap, take your cutters and snip the end. Use a file to make it smooth.

 

 

Thanks to my friends at Artbeads.com for the great products. 

• Swarovski Elements
• Swarovski Pearls

Full Disclosure: Many of the beads you see below are from Artbeads.com.  Some of the items I had on hand but all the pretty stuff is from them. To be clear; they gave me the beads so I would create and then write. Nothing really very sinister but I need to tell you this all upfront so none of us gets into trouble.

Spring Jewelry Pick-Me-Ups

Full Disclosure: Many of the beads you see below are from Artbeads.com.  Some of the items I had on hand but all the pretty stuff is from them. To be clear; they gave me the beads so I would create and then write. Nothing really very sinister but I need to tell you this all upfront so none of us gets into trouble.

Lately I’ve had some serious winter blues. I have desperately missed sunny blue skies and most of all; my flower gardens.  So during the last snow storm I lashed out at the weather and created some happy sun-loving pieces.

The first used a simple stringing technique.  I had an amazing sterling silver pendant from Artbeads.com that I wanted to focus on—the Hill Tribes Silver Large Woven Petal Flower Pendant.  The necklace portion is very simple. I used multicolored glass rondelles that I had on hand and strung them on Fireline.  The pendant is centered and the necklace measures 20” long. This pendant is really something else—it’s better silver than sterling.  Definitely check it out.

The second item I made was a bracelet using TOHO™ Bead Cube 4mm Matte Raku Blue/Teal Iris and complementing the matte color with super sparkly2-holed Swarovski XILION Silver-Plated Aquamarine Setting as an eye-catcher.  The bracelet was made using a modified ladder stitch.  After three rows I crossed the threads into an x and centered the silver elements. Finally, I used a gorgeous Swarovski crystal clasp for added bling.

 

The most recent issue of Bead & Button had a gorgeous design that I had to try. It’s beadweaving (which is my favorite to create).  I find the detail to be therapeutic.  The necklace uses triangle stitching and then embellishing with fire polished beads to make it really pop. Unfortunately I did not have enough Fire Polished Beads 4mm Bermuda Blue 1/2 Metallic Coated to finish it AND the worst part is that they’re out of stock! But, the beads are so gorgeous that I’ll wait until I can order more.  I have purple fire polished in the center and the metallic coated bermuda blue for the rest.

Much thanks to my friends at Artbeads.com for the gorgeous beads!

An Inexpensive Solution for Taking Your Jewelry Projects Everywhere You Go

I was in Michaels yesterday and saw these little containers in the scrapbook section.  They are small cases for storing photos.  They can hold up to 100 4x6 photos—OR your jewelry project. They were only $1.00 so I thought I could afford to take a couple home and experiment.  

I cut a piece of Vellux to fit one side of the container leaving a bit of a lip all the way around.  This makes for a very nice workspace for your lap the next time you’re on the train or sitting in the lobby of your daughter’s ballet class or kids’ swim class! (I don’t like sitting much—I have to keep busy or I get antsy.  Which explains my hyper kids—but I digress.)

What’s nice about this container is that it’s small enough to throw in my bag and take it when my daughter has ballet class but it’s also just the right size to store my beads, thread, scissors, and thread burner. True story.